What equipment for a 10-gallon aquarium? Heater, filter, light and substrate
In short: a 10-gallon tank (about 38 L, roughly 8 gallons of real water) needs a 50 W heater, a filter rated 30–50 GPH, about 15 W of LED light and about 22 lb of substrate. Count on $3.00 a month of electricity.
Sizes from the rules used by the Aqualitro equipment calculator, for a standard 20 × 10 × 12 inch tank.
Heater: 50 W in a heated room, 75 W in a cold room
The rule is about 4 W per gallon (1 W per litre) when the room stays above 64 °F, and 6 W per gallon when it gets colder in winter, rounded up to the next wattage sold. A heater with an adjustable thermostat lets you set the temperature your species need. Place it where the water moves, near the filter outflow, and check it with a separate thermometer.
Filter: 30 to 50 GPH
Freshwater tanks do well with a flow of 3 to 5 times their volume per hour: 30 to 50 GPH for 10 gallons. That usually means a sponge filter or a small hang-on-back filter. The flow printed on the box is measured with an empty filter; once it is packed with media and a bit dirty, it drops, so choose a model near the top of the range. Fish that dislike current (bettas, gouramis) prefer the low end or a sponge filter.
Light: about 15 W of LED
About 0.4 W of LED per litre is enough for fish and easy plants: around 15 W for this tank, on for 8 hours a day with a timer. More light without more plants mostly grows algae. Planted tanks with demanding species need stronger light and usually CO2.
Substrate: about 22 lb
Sand and gravel weigh about 1.5 kg per litre (0.0542 lb per cubic inch). For a 2-inch bed on a 20 × 10 inch footprint that is about 22 lb. One inch is enough for a fish-only tank (about 11 lb); rooted plants prefer 2 to 3 inches. Rinse gravel before use; sand should be added slowly to avoid clouding. Substrate calculator for your own dimensions →
Water changes and running cost
Change 0.8 to 2.1 gallons a week (10 to 25 % of the real water volume), with a conditioner to remove chlorine. The heater, filter and light together cost about $3.00 a month in a heated room and $5.70 in a cold one, at $0.17 per kWh. Electricity calculator →
Shopping checklist for a 10-gallon tank
- Heater: 50 W
50 watt aquarium heater on Amazon → - Filter: 30–50 GPH, a sponge filter or a small hang-on-back filter
aquarium filter 10 gallon on Amazon → - LED light: about 15 W, with a timer
aquarium LED light 20 inch on Amazon → - Substrate: about 22 lb of sand or gravel
aquarium sand on Amazon → - Thermometer and a water test kit
aquarium test kit on Amazon → - Water conditioner (dechlorinator)
aquarium water conditioner on Amazon →
We don't test or sell products. The links open Amazon search results for the size calculated above; compare reviews and prices there.
And the fish?
See how many fish fit in a 10-gallon tank, with stocking examples, or check your own mix in the stocking calculator.
5 gal 15 gal 20 gal 29 gal 40 gal 55 gal 75 gal 90 gal 125 gal
Frequently asked questions
What size heater do I need for a 10-gallon tank?
About 4 W per gallon in a heated room: 50 W for 10 gallons. In a room that drops below 64 °F in winter, plan 75 W. Pick a heater with an adjustable thermostat and place it near the filter outflow.
What filter is best for a 10-gallon aquarium?
Any filter rated for 30 to 50 GPH, that is 3 to 5 times the tank volume per hour. For 10 gallons that usually means a sponge filter or a small hang-on-back filter. Rated flows are measured with an empty filter, so a model at the top of the range is a safer choice.
How much substrate for a 10-gallon tank?
About 22 lb of sand or gravel for a 2-inch bed on a 20 × 10 inch footprint. Rooted plants like 2 to 3 inches; fish-only tanks are fine with 1 inch, which halves the amount.
How much does a 10-gallon tank cost to run?
About $3.00 a month in electricity in a heated room ($5.70 in a cold room) at $0.17 per kWh, mostly for the heater, with the filter running all day and the light 8 hours a day.